| 
| DESCRIPTION
ISOFLOW 8374 is Polycarboxylate based high performance hyper plasticizer intended for applications where longer workability retention is required. ISOFLOW 8374 is a particularly strong superplasticizer allowing production of consistent concrete properties andvery high strength.
ADVANTAGES
- Excellent Flowability resulting in minimal placing and compacting efforts.
- Longer workability results without overly extended setting times.
- Increased Compressive Strength of concrete.
- Increased Durability Limits.
- Reduced shrinkage and creep
USES
ISOFLOW 8374 permits reduction in amount of water normally required for a given workability. Provides concrete with self-consolidating properties.
- Highrise pumped concrete.
- High strength/grade e.g.
- (M60/M70/M80) Self-compacting concrete.
- High performance mass concrete.
COMPATIBILITY
ISOFLOW 8374 is compatible with other Cemex admixtures used in the same concrete mix. All admixtures should be added to the concrete separately and must not be premixed together prior to addition. ISOFLOW 8374 is suitable for use with all type of Portland cements and cement replacement material such as GGBS, Fly Ash, Microsilica.
TECHNICAL PROPERTIES
STANDARD COMPLIANCE: BS EN 934-2 and ASTM C494 as Type G & F depending on dosage.
DOSAGE
Recommended dosage is 0.2 2.5% by weight of cementitious material including GGBS, Fly Ash, Microsilica. Higher dosage by weight binder can be use depending on the mix design. Trail mix must be performing to establish the exact dosage require.
DISPENSING
The correct quantity of ISOFLOW 8374 should be measured by means of a recommended dispenser. ISOFLOW 8374 should be dispense into the concrete mixer together with mixing water.
SUPPLY
210 litre drum, 1000 litre totes and Bulk Supplies.
STORAGE
ISOFLOW 8374 has minimum shelf life of minimum12 month provided the temperature is kept within the range of 5ºC – 50ºC.
HEALTH AND SAFETY
HAZARD:
ISOFLOW 8374 Does not fall into the hazard classifications of current regulations However, it should not be swallowed or allowed to come into contact with skin and eyes.
PPE PRECAUTIONS:
Suitable protective gloves and goggles should be worn. Splashes on the skin should be removed with water. In case of contact with eyes rinse immediately with plenty of water and seek medical advice. If swallowed seek medical attention immediately do not induce vomiting.
DISPOSAL:
Cleaning and disposal spillages should be absorbed onto sand, earth or vermiculite and transferred to suitable containers. Remnants should be hosed down with large quantities of water. The disposal of excess or waste material should be carried out in accordance with local legislation under the guidance of the local waste regulatory authority
Additional Information: Additional Information Refer MSDS (available on request).