| 
| IDENTIFICATION OF THE SUBSTANCE / PREPARATION AND OF THE COMPANY / UNDERTAKING
Product Name : ISOFLOW 7273
Application : Concrete Admixture.
Company : CEMEX TOPMIX L.L.C
Address : POST BOX; 37900 ,Al Quoz Ind 3 , Dubai -UAE
2. COMPOSITION/INFORMATION ON INGREDIENTS
Composition: aqueous solution of Modified polycarboxylates, co-polymers.
Mixture of: 5-chloro-2-methyl-4-isothiazolin-3-one and 2-methyl-2H isothiazol-3-one (3:1)
3. HAZARDS IDENTIFICATION
Type of product: Mixture
Classification of the substance or mixture
Skin sensitization – May cause an allergic skin reaction.
Precautionary statements
Prevention – Avoid breathing dust/ fume/ gas/ mist/ vapours/ spray.
Hazardous components
Mixture of: 5-chloro-2-methyl-4-isothiazolin-3-one and 2-methyl-2H isothiazol-3-one
4. FIRST AID MEASURES
General advice – Move out of dangerous area. Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled – Move to fresh air. Consult a physician after significant exposure.
In case of skin contact – Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. If symptoms persist, call a physician.
In case of eye contact – Remove contact lenses. Keep eye wide open while rinsing. If eye irritation persists, consult a specialist.
If swallowed – Do not induce vomiting without medical advice. Rinse mouth with water. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person.
5. FIRE FIGHTING MEASURES
Extinguishing media Suitable extinguishing media
In case of fire, use water/water spray/water jet/carbon dioxide/sand/foam/alcohol resistant foam/chemical powder for extinction.
Special hazards arising from the substance or mixture Hazardous combustion products
No hazardous combustion products are known
Advice for firefighters Special protective equipment for firefighters
In the event of fire, wear self-contained breathing apparatus.
Further information – Standard procedure for chemical fires.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions
Use personal protective equipment. Deny access to unprotected persons.
Environmental precautions
Do not flush into surface water or sanitary sewer system.
Methods and material for containment and cleaning up
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Keep in suitable,
closed containers for disposal.
7. HANDLING AND STORAGE
Precautions for safe handling
Advice on safe handling – Do not breathe vapours or spray mist. Do not get in eyes, on skin, or on clothing. Persons with a history of skin sensitisation problems or asthma, allergies, chronic or recurrent respiratory disease should not be employed in any process in which this mixture is being used. Smoking, eating and drinking should be prohibited in the application area. Follow standard hygiene measures when handling chemical products
Advice on protection against
fire and explosion – Normal measures for preventive fire protection.
Hygiene measures – Handle in accordance with good industrial hygiene and safety practice. When using do not eat or drink. When using do not smoke. Wash hands before breaks and at the end of workday.
Requirements for storage areas and containers – Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Store in accordance with local regulations.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Contains no substances with occupational exposure limit values.
Personal protective equipment
Eye protection – Safety glasses with side-shields, Eye wash bottle with pure water
Hand protection – Chemical-resistant, impervious gloves complying with an approved standard must be worn at all times when handling chemical products. Suitable for short time use or protection against splashes: Butyl rubber/nitrile rubber gloves (0,4 mm), Contaminated gloves should be removed. Suitable for permanent exposure: Viton gloves (0.4 mm), breakthrough time >30 min.
Skin and body protection – Protective clothing (e.g. Safety shoes, long-sleeved working clothing, long trousers). Rubber aprons and protective boots are additionally recommended for mixing and stirring work.
Respiratory protection – Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator. organic vapor filter (Type A) A1: < 1000 ppm; A2: < 5000 ppm; A3: < 10000 ppm Ensure adequate ventilation. This can be achieved by local exhaust extraction or by general ventilation. This applies in particular to the mixing / stirring area. In case this is not sufficient to keep the concentrations under the occupational exposure limits then respiration protection measures must be used.
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance : liquid
Colour : Dark Yellow
Odour : characteristic
Flash point : Not applicable
pH : 4,5 – 7,0
Vapour pressure : 23 hPa
Density : approx.1,06 g/cm3
Water solubility : soluble
10. STABILITY AND REACTIVITY
Reactivity – No dangerous reaction known under conditions of normal use.
Chemical stability – The product is chemically stable.
Possibility of hazardous reactions Hazardous reactions – Stable under recommended storage conditions.
Hazardous decomposition products – No decomposition if stored and applied as directed.
11. TOXICOLOGICAL INFORMATION
Acute toxicity – Not classified based on available information.
Skin corrosion/irritation – Not classified based on available information.
Serious eye damage/eye irritation – Not classified based on available informtion.
Skin sensitization – May cause an allergic skin reaction.
Respiratory sensitisation – Not classified based on available information.
Germ cell mutagenicity – Not classified based on available information.
Carcinogenicity – Not classified based on available information.
Reproductive toxicity – Not classified based on available information.
12. ECOLOGICAL INFORMATION
Toxicity Components
mixture of: 5-chloro-2-methyl-4-isothiazolin-3-one and 2-methyl-2Hisothiazol-3-one (3:1):MFactor (Acute aquatic toxicity) : 100
M-Factor (Chronic aquatic toxicity) : 10
Product: Assessment
This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
13. DISPOSAL CONSIDERATIONS
Waste treatment methods
The generation of waste should be avoided or minimized wherever possible. Empty containers or liners may retain some product residues. This material and its container must be disposed of in a safe way. Dispose of surplus and non-recyclable products via a licensed waste disposal contractor.
Disposal of this product, solutions and any by-products should at all times comply with the requirements of environmental protection and waste disposal legislation and any regional local authority requirements. Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers.
14. TRANSPORT INFORMATION
This product is NOT classified as dangerous for transport.